ACTA-D190-UHF              Stationary long range reader

ACTA-D190-UHF has a built-in high sensitivity 8dbi antenna, and by using an RS485 serial communication interface bits interface to work with ACTAtek3 device, it can remotely connect and communicate with terminal equipment.

In addition, the design also helps to reduce power consumption and save energy, which is compliant to the trend of environmental protection and carbon reduction. It can also be applied to parking lot management and security control, and other relevant management.

• Electronic tag compliant with EPC Gen (ISO18000-6C) standard
• Maximum power output is 27.9dBm (adjustable)
• Supports antennas of 8dBi gain; has a read range of over 10 meters
• Developed patented design to reduce EMI radiation
• Allowed to operate in long-range dense-reader mode, compatible with Gen 2 standard
• Automatic matching of output impedance of the antenna impedance
• Adopts a lookup table method to achieve frequency hopping spread spectrum

Operating Voltage                  12V

Antenna Gain                          8 dbi

Antenna Connection              50 ohm U.FL.

Transmitting Power                27.9 dBm (Adjustable)

Communication                      RS485

Operating Frequency             902-928 MHz

Supported Transponders      EPC Gen2(ISO 18000-6C)

Modulation                               PR-ASK,ASK

Current Consumption              < 1A

Temperature Range                 Operating -20C to +55C, Storage -20C to +85C

Receiving sensitivity                -85 dBm

Reading range (Avg.)               > 10M

Dimension( L x W x H )           228 x 228 x 52.3 mm

Relative Humidity                    5-90%

Ingress Protection                   IPX6